I just joined this forum because Im at ends with an issue on my girlfriends 2000 Nissan Quest SE i tried to fix for her.

We just purchased a 1999 Nissan Quest - and was wondering where we could purchase an Owners Manual for it ---- and how the Audiovox TV/DVR player works --- the power light comes on - we can insert the DVR - but nothing happens.

for front wheel bearing lug nut

Hello. I recently purchased a 2000 Nissan Quest and trying to figure out the role of the corner lamps. The corner lamps uses 3157 bulbs which are high bright and low dim. I am unsure about the operation

My headlights look terrible so bought new one. Have looked all over the Internet and YouTube but can't find a video or how to guide on replacing the whole assembly. Have figured out the front facia will have to be removed. But was wondering if anyone had any tips. Want to do it this weekend.

Here's an example of why the Quest has left the impression of low build quality. My 04 had a bad windshield washer pump, and on cutting it up I found rust all over the casing and between the rotor and (permanent) magnets:

i have a 2001 quest and was just wondering is there any websites that sell these molded carpets for my year van because most of the sites ive been to only have up to 1998 then it jumps straight to 2004 wondering if anyone know of a site to go to or if i could use one of those years for ordering the carpet any help would be appreciated.

Okay, my wife called me today and said that her van was missing and jerking real bad and would not hardly go over 25 MPH or so but there was no engine light on. I left work to come home and she called me on the way and said that when she got home that smoke was coming from under the van around the front and there was a funny smell. When I got home an hour later I looked everything over but did not see anything obvious so I tried to start it and let it idle, but it would barely run and seemed to be backfiring through the exhaust.

Timing Chain & Guides

A couple of weeks ago most of my instrument cluster lights went out. Is this likely to be a circuit board issue? I don't want to open it up just to find intact filaments if this is a known issue.