1999 Quest Power Window Problem - Motor good, regulator good

I need to know what to look at for my problem. The driver's window goes down but not up. The auto-down feature works as it is supposed to.
I can apply 12v to the motor directly and by reversing the polarity I can get the window to go up or down smoothly with no problems.
Does this point to a bad switch or is there a relay in the circuit that may be the problem? TIA

Power windows trouble
Go for the switch first. The drivers switch goes thru the pass sw
to activate to motor on the pass side. Try pulling the sw panel out and cleaning with an electronic type spray cleaner. Listen to
hear the cliks or ohm it out. DF
D FOARD
Im having same issue with
Im having same issue with passnager side, but i can roll up the window by using master switch(Driver side). I even replaced the switch with known working switch and still no go.
What could be the problem? and how to fix it?