Blower fan

The blower fan (front)does not work in 1,2 or 3 setting. It works only at 4.
Thanks.
Nissan Quest Forum CommunityOn a Quest for the Ultimate Van |
|
NavigationUser loginRecent comments
|
Blower fan![]() The blower fan (front)does not work in 1,2 or 3 setting. It works only at 4. Thanks. |
New forum topicsWho's new
Who's onlineThere are currently 0 users and 3 guests online.
|
blower fan
I cannot turn off the fan blower. None of the fan dials seems to be able to turn off the fan. TheA/C works fine and will trun on and off..but the fan blower keeps on blowing. What is the fix hopefully it's simple and not expensive. need help
2000 nissian quest
I cannot turn off the fan blower. None of the fan dials seems to be able to turn off the fan. TheA/C works fine and will trun on and off..but the fan blower keeps on blowing. What is the fix hopefully it's simple and not expensive. need help
Blower Fan
Had same issue on Nissan quest late '99 GXE - Replaced Blower resistor with Standard brand model RU327 (flat type ordered by selecting 2000 year fm Rockauto) this week. Was not a perfect slide-in fit with wire port but managed. Fan started working in 1,2,3,4 but went off in 3 next morning after burn smell in cabin. Now, fan is back to working only in 4 now. Did I do something wrong here? Please suggest possible reason & solution - Thx.
Had the same issue. Replaced
Had the same issue.
Replaced the blower resistor three times--each time quicker than the time before. I finally had to replace the motor itself. That was about a year ago and the problem hasn't returned. (Note--if you go to a dealer--tell them you will install the resistor yourself. They soaked me $48 to turn those two screws!!!)
so did you fix this? if so
so did you fix this? if so what fixed it?
Front blower fan
prob. is a $19.00 resistor that goes under the pass. side dash. you have to take the glove box out,but i haven't been able to get mine out. need advice.
my fan resistor wasn't inside
my fan resistor wasn't inside the glove box/ it was below it accessed by 2 screws
http://contentinfo.autozone.com/znetcs/product-info/en/US/wl2/JA1399/image/8/
mine's costs $33.oo